Hello, Sign In

CG100 Prog mileage adjust function test report

CG 100 programmer is a reliable tool that offers various functions, including precise mileage calibration, airbag computer repair, and BCM repair. We have collected successful tests from customers who used it specifically for mileage calibration.

Test 1
Emgrand 9s12 mileage correction ok.
Status: the old mileage value is 30097KM, and the new value is 130193KM.

Test 2
Repair 2010 Volvo S80L Mileage ok.
Status: original mileage is 160886 KM, new mileage 100910 KM is written successfully.

Test 3
Mercedes GL400 X166 2014 V6 cluster calibration with CG100 and MB Can Filter ok.
Status: old mileage value is 151415Km, change km successful to 90880km.
mileage value-01
mileage value-02

Test 4
Read and write 2022 Honda Civic S6J336A MCU ok

Test 5
ToyotaHondaS6J3001 Cluster MileageCorrection ok
Status: the original mileage is 50364km, check current mileage is 17778km.

Test 6
Correct odometer on Honda Ridgeline MC9S12H128 processor ok

Test 7
Reset Volvo XC60 2012 9S12 mileage ok
Status: Lower original mileage 60307 KM to 10407 KM no problem

Test 8
Toyota Prado 2013 93A86 Odometer Correction ok
Status: the original mileage is 155225 km, check current mileage is 61232 km.

Test 9
2018 Infiniti Q50L Mileage Adjustment ok
Status: the old mileage value is 29497KM, please refer to the image below, displaying the accurate mileage value with all data and functions operating normally.
mileage value-03

Test 10
Chevrolet Malibu XL 2018 24C32 Mileage Correction ok

Test 11
Buick GL8 2018 24C32 mileage program with CG100 prog and EEPROM adapte ok
Status: mileage reading and writing success, install the BCM back to Buick GL8, power on the car, verify it is working.
mileage value-04

How to perform Instrument Mileage Repair with CG100 prog:
  1. Find the car type, model, and chip.
  2. Choose the correct adapter as shown in the software.
  3. Follow the provided wiring diagram.
  4. Click "start" and backup your original file.
  5. Input the mileage that you want (the software will handle the repair). If unsuccessful, send your file to our tech support.
  6. For unlisted types, go to the "programmer" page, locate the chip, and test the chip pin to wiring using a multimeter.

If you have more successful test with CG100 programmer, welcome to share with us.
Where to purchase:
https://www.cgdiprog.com/products/cg100-prog-iii-full-version.html

 
Back to top